Know-how

Double-acting baking powder: the slow acid decides your volume

Most volume problems in industrial baking are not about how much baking powder you add, but which acid reacts when. A short guide to SAPP, MCP and the 22–26 °C window.

Two baking powders with the same neutralising value can give 8% different cake volume. The difference is the release curve — how much gas comes off in the mixer, and how much waits for the oven.

Three acids, three timings

  • MCP (monocalcium phosphate): reacts in the bowl. Useful for batters that are baked within 20 minutes, wasteful for anything held longer.
  • SAPP (sodium acid pyrophosphate): slow, coated grades hold their gas until 45–55 °C. This is the acid that carries the oven spring.
  • SALP or sodium aluminium phosphate: long, steady release, good for thick batters and heavy crumb, but check your market's aluminium rules first.

The temperature window

Batter above 28 °C starts releasing SAPP gas before the mould reaches the oven. On a summer line that is one of the most common causes of a 5–10% volume drop between shifts. Hold the batter at 22–26 °C, and chill the water rather than the room.

Practical numbers

  • Cakes and sponges: 1.5–3.0% of flour weight, SAPP-led
  • Biscuits and cookies: 0.8–1.5%, MCP-led for a tight, even spread
  • Steamed buns: 0.5–1.0%, slow acid only, so the bun does not collapse on cooling
Ask for the release curve, not just the CO2 value. We send the gas-release graph with the sample so your team can match it to the line's holding time.

One thing to watch

Higher SAPP means more residual phosphate in the finished product. If your label targets a low-additive claim, raise the MCP share and shorten the holding time instead of simply increasing the dose.

Back to news